ESM PowerPC
ESM Embedded Systems Modules are complete computers on a modue. They consist of the hardware (CPU, chip set, memory, I/O) which is not fixed to any application-specific function, an FPGA programmed in VHDL code, which provides I/O that is also independent of a specfici application, and the BSP support.
ESM modules are based on PCI. They have two system connectors: J1 has a fixed signal assignment, while J2 is variable depending on the final application-specific configuration of the ESM and the carrier board. J2 also feeds the I/O signals of the functions programmed in the FPGA to the carrier card. A third connector, J3, is used for additional signals on those boards that come without front I/O connectors. | |
|
 Products
Starter Kits
|
|
|
|
