EK6N ESM Starter Kit with EM1N/MPC5200B
The EK6N is a starter kit that allows evaluation of the functions of the EM1N ESM™.
The kit consists of the CPU module, an FPGA with additional I/O functions, the carrier card, memory, PSU, various cables, and an adapter for mounting a PCI-104 module. The EK6N provides versatile mounting options and can also be installed in a standard PC.
The EM1N is controlled by the MPC5200B PowerPC® processor that was especially developed for automotive applications. It is equipped with soldered DDR SDRAM, on-chip NAND Flash, graphics memory, boot Flash and battery-backed SRAM.
Additional I/O functionality is implemented in the on-board FPGA, comprising graphics and touch, IDE and additional UARTs. The physical interfaces are accessible on the carrier board which is included in the kit. Separate SA-Adapters™ are needed for some of the UARTs provided in the FPGA. The functionality of the FPGA is dynamically loaded by the application software. |
This group belongs in these product families |
• MEN Micro |
|
|
|
|
