The BL2600 Wolf single-board computer provides embedded system engineers a complete and expandable performance package. Two standard models are available one with 10/100 Ethernet and one without, both feature the Rabbit 3000® microprocessor at 44.2 and 29.4 MHz respectively, with at least 512K Flash and 512K SRAM (standard).

The BL2600 is an advanced single-board computer that incorporates the powerful Rabbit 3000 microprocessor, Flash memory, SRAM, digital I/O ports, A/D converter inputs, D/A converter outputs, RS-232/RS-485 serial ports, and a 10/100Base-T Ethernet port. Optional RabbitNet Expansion and serial Flash cards are available. The BL2600 Wolf can be connected via two mechanisms: Dual-entry IDC through-hole sockets, which allow header mounting on either side of the board and polarized locking industry-standard friction-lock connectors that enable rapid assembly with wire harnesses. These connectors provide dependable cable harness connectivity to I/O. RabbitNetâ„¢ expansion boards are available (including A/D, D/A, digital I/O, and keypad/display interface cards) to interface via the two multiplexed SPI RS-422 ports.

Features

• Rabbit 3000® @ 44.2 MHz
• 10/100Base-T Ethernet Connectivity
• 512K Flash and 512K SRAM standard
• 36 digital I/O (configurations include protected digital inputs, sinking/sourcing outputs, high current outputs)
• 12 analog channels: eight 11-bit A/D, four 12-bit D/A buffered outputs
• 5 serial ports
• RabbitNet expansion capability

Other available feature configurations: 10 Base-T, reduced memory, 16MB NAND, removable memory slot supporting up to 128MB

RabbitNet

RabbitNet expansion ports enable a modular and expandable embedded control system whose configuration of expansion cards can be tailored to a large variety of demanding real-time control, display, and data-acquisition applications. A typical RabbitNet system consists of a master single-board computer and one or more peripheral cards. A high-performance Rabbit 3000 or Rabbit 2000® microprocessor on the master provides fast data processing, and the master SBC also provides the DCIN and +5 V power for the peripheral cards.

Programming the BL2600

Programs are developed and debugged using industry-proven Dynamic C® software, which runs on a Windows PC. The programming device is connected via a serial cable, a USB cable, or Ethernet. Comprehensive debugging support includes break points, watch expressions and many other extensive features oriented toward real-time embedded systems programming. An extensive library of drivers and sample programs is provided, including a royalty-free TCP/IP stack for network and Internet communications. Full source code is provided for most library routines.